1 | 2 | 3 | 4 | 1 |
CD Transport Assembly
1FINGER WELLS
These cutouts make it easy to grasp a CD by its edges when placing it on or removing it from the spindle. Both
LEVELLING SCREWS
For the best performance, the Nº31.5’s transport assembly should be level. Four levelling screws (one inside each finger well) allow you to adjust the transport assembly easily.
With the supplied 3⁄32" hex driver, and using the Nº31.5’s bubble level (3) as a gauge, adjust one or more of these screws to bring the transport assembly to level. To lower a corner, turn the corresponding screw clockwise; to raise a corner, turn the screw counterclockwise.
2SPINDLE
This is the device that spins the CD, and on which the CD rests during play. The CD must be centered on the spindle, and it must be clamped to the spindle by the disc damper.
24
