HP N31.5 Rear Panel

main power

			REFERENCE CD TRANSPORT Nº 31.5
			designed and manufactured in U.S.A.		S/N
			by MADRIGAL
											CLASS 1
	communication ports						digital outputs
									aes/ebu		LASER PRODUCT
slave		slave		eiaj		st		spdif
	out	in								WA R N I N G : B E F O R E AT T E M P T I N G T O
										OPERATE THIS DEVICE, REFER TO OWNER'S
										M A N U A L F O R P R O P E R O P E R AT I N G
										INSTRUCTIONS AND SAFETY PRECAUTIONS.
										HAZARDOUS VOLTAGE AVAILABLE INSIDE;
										DISCONNECT AC ~ MAINS CABLE BEFORE
										OPENING UNIT.

8

1 2 3 4 5 6 7 9 10

Rear Panel

1	OPERATING VOLTAGE INDICATION
	The Nº31.5 is set at the factory (internally) for 100, 120, 200, 220, or 240VAC
	mains operation as appropriate for the country in which it is to be sold.
	Make sure that the label on the rear of the left tower (as seen from the
	rear) of the Nº31.5 indicates the correct AC operating voltage for your loca-
	tion, as attempting to operate the Nº31.5 at an incorrect voltage can damage
	the unit.
	The Nº31.5 Reference CD Transport is also set at the factory for operation
	on either 50 or 60 Hz AC line frequencies, as appropriate for the country in
	which it is to be sold. It will not operate if it senses an incorrect line fre-
	quency.
Warning!	Neither the voltage nor the line frequency setting may be
	changed by the user. There are no user serviceable parts
	inside the Nº31.5. Only qualified, authorized service personnel
	may open the Nº31.5 CD Transport, as hazardous voltages
	exist within the unit.
2	MAIN POWER
	This switch turns the Nº31.5 on and off. The switch must be in the “” (on)
	position for the Nº31.5 to function. (See Setup and Installation.)
Caution:	Never operate the main power switch without first making sure
	that power is turned off to your receiver, integrated amplifier,
	or preamplifier/power amplifier.

34