To Nº33x Slave Out

To Nº33x Slave In

Locking tab

Locking tab

6-Conductor Amp-Amp Link Cable

In this case, we use pins 1-6 of the eight-pin connector in a “straight-through” connection, and leave pins 7-8 empty.

Using the latest software As we add features and functionality to the Link system, we sometimes need to update associated software. If you are Linking a system with one or more older components (early Nº38’s, Nº30, Nº31, etc.), you may need to have your dealer replace a socketed EPROM in order to install the current version of that product’s software. If you think you may need new software, please contact your dealer with the software code numbers of all Nº30 Series units in the system. This information is typically shown during power-up as the word CODE followed by a combination of four numbers and/or letter. (Your dealer should be able to help you with this.)

51