Removal and Replacement Procedures

8.If it is necessary to replace the Bluetooth module cable, remove the cable 1 from the clips 2 in the base enclosure and remove the cable from the routing channel 3 in the base enclosure.

The Bluetooth module cable is included with the Bluetooth module spare part kit and is also available in the Cable Kit, spare part number 409990-001.

Removing the Bluetooth Module Cable

Reverse the above procedures to install the system board.

5–74

Maintenance and Service Guide

Page 174
Image 174
HP nx9420, nw9440 manual Reverse the above procedures to install the system board