SECTION 1

GETTING ACQUAINTED

Printer Control Panel

 

1

2

 

3

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 9

5

 

 

 

 

 

 

 

9

 

6

 

7

 

8

 

 

 

 

 

 

1. ON LINE key – This key is used to put the printer on/off line. LED “slow flash” = Printer is powered on, but off-line. LED “on” = Printer is on-line

Note: The printer must be off-line to access the menu modes or TEST print.

2.- key – In the menu mode this key will scroll to the previous selection.

3.ENTER key – This key is used to start/stop media feed.

When the printer is placed in any of the menu modes, the ENTER key is used to select the options available.

When the printer is off-line this key is used to start the Paper Feed function.

4. ERRORprocess. Indicator – This indicator lights when there is a problem with the printing

5. RESET key – Holding down this key, until all LED’s light momentarily, will reset the printer to its normal ready state.

6.+ key –In the menu mode this key will scroll to the next selection.

7.MENU key – This key causes the printer to enter the menu mode where several operator functions can be accessed.

8.TEST key – Pressing this key will put the printer into the test pint mode (LED on); allowing the printer’s internal “test image” to be printed.

9.LCD DISPLAY – Indicates the status of the printer including piece count, menus, and error messages.

NOTE: A complete description of the functions and operation of the printer keys

can be found in Section 3 – Operating the Printer.

Envelope Imager 1.5/1.5 Plus Operations (Rev.6/7/2007)

11