SECTION 1

GETTING ACQUAINTED

Operator View

NOTE: The Envelope Imager 1.5 and Envelope Imager 1.5 Plus (+) are similar in operation. The only difference is that the Envelope Imager 1.5 has only one print speed, regardless of print resolution (print quality), while the Envelope Imager 1.5 Plus has variable printing speeds, based on the print resolution.

2 3

14

5

7 6

Figure 6

1. PRINT-CARRIAGE COVER – The Print-Carriage Cover encloses the printhead carriage and media transport rollers.

2. MEDIA SIDE GUIDES – Used to center the media in the printer and provide straight feeding of media.

3. REAR MEDIA GUIDE – Allows for adjustments in stack angle, based on media type and length. Helps to force the media against the separation area.

4. REAR PAPER SUPPORT – Provides the proper angle to enhance media feeding and separation.

5. LCD DISPLAY – Displays information about the status of the printer.

6. PRINTER CONTROL PANEL – The keys on the printer control panel are used to operate the printer.

7. MEDIA THICKNESS ADJUSTMENT KNOB – Is used to set the printheads at the proper height for printing on the media. Always raise the printheads to their uppermost position when storing the printer..

8

Envelope Imager 1.5/1.5 Plus Operations (Rev.6/7/2007)