SECTION 1

GETTING ACQUAINTED

Packaging/Shipping

The printer is shipped in appropriate packaging so that, under normal shipping conditions, it reaches its destination without damage.

NOTICE: Report damage to the carrier. The carrier is liable for any damage during transport. Transport and storage should take place under normal conditions, i.e. at temperatures between +5°C and +70°C and relative air humidity of up to 80%. Exposure to conditions that are not permissible may lead to damage which is not externally visible.

Please save the packaging for future use! It will be required if you ever need to ship the printer.

Contents

The following items are included with your printer:

1Print-Carriage Cover (including mounting hardware)

1Power Cord

2Media Side Guides (mounting hardware attached to printer)

1Rear Paper Support (mounting hardware attached to item and printer)

1Rear Media Guide (mounting hardware attached to item)

1Driver Installation CD ((Operations Manual (PDF) included on this CD))

Note: The printer drivers on this CD have been tested and approved by Rena Systems.

Note: Parallel and USB interface cables and Ink cartridges are not included with the printer. Interface cables (recommend 6 ft or less) can be purchased from computer and office supply stores. Ink cartridges can be purchased through your local Rena dealer.

Figure 1

Envelope Imager 1.5/1.5 Plus Operations (Rev.6/7/2007)

5