HP Rip Software Using, Transformation, Options

Using

Transformation

Options

You can print Encapsulated PostScript (EPS), Tagged Image Format File (TIFF), and Joint Photographic Experts Group (JPEG) files directly by downloading them from your workstation using the Downloader Utility, or from the server using the DiskDirect port.

You can apply a transformation mode to these files automatically or manually at the RIP’s Port Configuration dialog box. If you select automatic mode, the transformation is applied automatically before printing. If you select manual mode, the job is sent to the Attention Queue, where you can set the mode interactively and then send the job to be printed.

The following modes are available:

Original /	Mode
Printed
	Best Fit - scales the image to fit as much of the
	selected media size as possible. The image is
	automatically rotated if necessary for the best
	fit.
	Horizontal Fit - scales the image to fit the width
	of the selected media size. Any image area
	scaled beyond the vertical dimension of the
	media size is clipped.
	Vertical Fit - scales the image to fit the height of
	the selected media size. Any image area scaled
	beyond the horizontal dimension of the media
	size is clipped.
	Stretch Fit - scales the image in the horizontal
	and vertical dimensions to fit the entire area of
	the selected media size, without regard to
	aspect ratio.
	No Change - prints the image at its original size
	and orientation, without regard to the default
	media size selected.
	Manual - allows you to interactively crop, tile,
	scale, flip, and rotate the file before it reaches
	the RIP.

Using Transformation Options 3-9