HP SB manual Electrical, Physical, Environmental

Table 3: Operating Specifications

Local control	•	Step-up, step-down channel selection
	• Control of one external relay driver
	• IEEE 488.1 address selection
	• Return-to-local function
	•	Language selection
Remote	•	GPIB interface:
control		IEEE 488.1 1987 capability SH1, AH1, T6, L4, SR1, PP0, DC1, C0, E1
	•	RS232 interface:
		setting 8 bits, 1200 baud, 1 stop bit, no parity
Command set	Revised command set. Capable of emulating command set of JDS
	Uniphase SC-0 and SX-0 Series switch models.
Drivers	Eight open collector outputs, sink current 100 mA maximum per output
	(driver):
	•	Drivers 1, 2, 3, 4, +5V, and GND (ground) are accessible from back
		panel connector
	• Drivers 5, 6, 7, and 8 are internal
	• Driver 1 can also be controlled from the DRIVER1 key on the front panel
Warm-up time1	1 hour at 25 °C ambient temperature

1Applicable for optimum repeatability performance.

Table 4: Other Specifications

Electrical

Input voltage	100 to 240 V AC, 50 to 60 Hz
Power consumption	80 VA maximum
Physical
Dimensions (W x H x D)
standard	21.2 x 8.9 x 35.5 cm
with rack-mount kit1	48.3 x 8.9 x 35.5 cm
Weight	3.75 kg
Environmental
Operating temperature	0 to 55 °C
Storage temperature	-40 to 70 °C
Humidity	maximum 95% RH from 0 to 55 °C

1Rack-mount kit is optional.

General Information and Specifications – 10