Chapter 4. Network Configuration
DNS Name Or IP Address
Enter the DNS name or IP address for the reference host. The reference host must be located on the other side of the default gateway.
IP address
Shows the IP address of the DNS Name Or IP Address you entered in the previous field.
Delete Row
If you select this box, the row is deleted when you click on Create new rows, Save, or Look up all IP addresses again.
Create
Enter the number of new rows you want to add to the table, and then click on Create.
Save
Saves the Default Gateway configuration to the preliminary configuration.
Cancel
Clears and resets all fields in new rows and reset changes in old rows.
Networks and Computers
Here, you name groups of computers and networks. Sometimes it can be useful to give a group of computers a network name, such as Administration. If you want to group some computers, this can be done here, even if they do not have consecutive IP addresses. You can also include a subgroup when defining a new network group.
The names are used when you configure Surroundings, Filtering and Local Registrar.
Every group of computers which can reach each other without having to pass through the firewall needs a separate network group.
The rows are sorted in alphabetical order, except that all upper case letters are sorted before lower case letters (B comes before a).
When using an already defined group as a subgroup, select the name of the group under Subgroup. Set Interface/VLAN to
26
