![](/images/new-backgrounds/1270635/27063587x1.webp)
Chapter 5. SIP Configuration
Transport
Select which SIP signaling transports should be allowed on this port.
Comment
Enter a comment to remind yourself why you added the port.
Delete Row
If you select this box, the row is deleted when you click on Create new rows or Save.
Create
Enter the number of new rows you want to add to the table, and then click on Create.
Provisioning Relay
Remote phones usually need to access your PBX for provisioning. For many phones, the provisioning server is the same as their registrar, which means that it is the IP address of the Telecommuting Module. To enable provisioning, the Telecommuting Module can open ports for this traffic.
Select if the Telecommuting Module should open ports for provisioning traffic, or if the phones get their settings in another way.
SIP Media Port Range
State a port interval which the Telecommuting Module should use for SIP media streams. You can use any high ports except 4500 (reserved for
Note! A change in the port interval will make the SIP module restart when the configuration change is applied.
When the SIP module is restarted, all active SIP sessions (SIP calls, video conferences etc) will be torn down and all SIP user registrations will be removed.
Enter the lower and upper limit of the port range that the Telecommuting Module should use for media streams. The upper limit must be at least as high as the lower limit.
36