HP VCX Software manual Domain, Relay To

Chapter 5. SIP Configuration

Domain

Enter the domain name of the SIP domain. This domain is compared to the domain in the Request-URI of the incoming SIP packet.

You can’t enter a domain that was entered in the Local SIP Domains table.

Relay To

DNS Name Or IP Address

Enter the IP address for the SIP server handling the domain. You can also enter a DNS name for the SIP server, if it has a DNS-resolvable host name, even if the SIP domain is not possible to look up in DNS.

IP address

Shows the IP address of the DNS Name Or IP Address you entered in the previous field.

Port

Here, enter the port on which the SIP server listens for SIP traffic. The standard port is 5060 (5061 for TLS).

Transport

You can select which transport protocol to use between the Telecommuting Module and the SIP server. Under Transport, select from UDP, TCP and TLS.

Priority

If you entered more than one IP address/host name for the same domain, you should also assign them Priority and Weight. A low Priority value means that the unit should have a high priority.

Weight

If more than one unit has the same Priority, the signaling sent to them is distributed between them according to their Weight. If two units have the same priority, and Unit 1 has weight 4, and Unit 2 has weight 9, 4/13 of the signaling will be sent to Unit 1, and 9/13 will be sent to Unit 2.

40