Two Satellite Receivers (NTSC)

You must have two identical satellite receivers from the same source and the HP Digital Entertainment Center dual-tuner option (select models only) to set this up. This configuration will allow you to watch live TV on one channel and record another channel at the same time.

Connect the TV signal source from each satellite receiver into each HP Digital Entertainment Center tuner.

If you are using two matching satellite receivers with S-video or composite video output, do the following:

1Make sure that a coaxial cable connector from your dish source is plugged into two cable outputs, and each satellite receiver In connector.

2Connect a video cable for satellite receiver 1: a Choose a Video Out connector:

■Video (composite)

■ S-video

bConnect the video cable from the satellite receiver back panel video output connector.

cConnect the video cable into the HP Digital Entertainment Center back panel TV Source 1 In connector.

3Connect stereo audio cables for satellite receiver 1 (skip this step if using coaxial [RF]):

a From the satellite receiver back panel Audio Out right (red) connector and the Audio Out left (white) connectors.

b Into the HP Digital Entertainment Center back panel TV Source 1 In Audio right (red) and Audio left (white) connectors.

4Connect a video cable for satellite receiver 2:

a Choose a video out connector, use the same type as satellite receiver 1:

■ Video (composite)

■ S-video

bConnect the video cable from the satellite receiver back panel video output connector.

cConnect the video cable into the HP Digital Entertainment Center back panel TV Source 2 In connector.

5Connect stereo audio cables for satellite receiver 2 (skip this step if using coaxial [RF]):

a From the satellite receiver back panel Audio Out right (red) connector and Audio Out left (white) connectors.

b Into the HP Digital Entertainment Center back panel TV Source 2 In Audio right (red) and Audio left (white) connectors.

Connecting TV Source In

Connecting TV Source In 95