Configuring Video

You may have to optimize your HP Digital Entertainment

Center video configuration to get the best image on your

TV/display screen.

Select the configuration that most closely

matches your home system. See:

“Configuring Video Output” on page 141

“Dual screen” on page 142

“Adjusting the Desktop Display” on page 144

“Finding ATSC HDTV and Standard TV Channels” on page 151

“Tuning the Desktop Display” on page 151

Configuring Video Output

Initial Configuration

You can configure your HP Digital Entertainment Center video for dual-display. For instance, you can view the screen on your TV and your monitor if both are connected. You can also set up additional displays. See “Video Out to TV and Monitor” on page 67 to connect your TV and monitor.

If you have a multichannel sound system, and the broadcast is only 2-channel, you may not hear all the sound; you may need to change your audio settings to 2.0/2.1. Then change the settings back for multichannel broadcasts.

Video software can change periodically; check HP Support for updates. Go to http://www.hp.com/ support and select your model number.

n

Your TV and monitor must be connected to the HP Digital Entertainment Center before turning on the power to see the display on two screens.

Initial Configuration 141