One Cable TV Box orDigital Cable Receiver (NTSC)

Source In

Connect the NTSC TV signal source from the standard cable TV set-top box or digital cable receiver (sold separately) into the HP Digital Entertainment Center.

If you are using a standard set-top box or digital cable receiver with S-video or composite video output, do the following:

1Make sure that a coaxial cable connector from your cable TV source (wall) is plugged into the set-top box or digital cable receiver In connector.

2Connect a video cable:

aChoose a video out connector:

■ Coaxial (RF)

■ Video (composite)

■ S-video

bConnect the video cable from the set-top

box or digital cable receiver back panel Video Output connector.

cConnect the video cable into the HP Digital Entertainment Center back panel TV Source 1 In connector.

3Connect stereo audio cables (skip this step if using coaxial [RF]):

a From the set-top box or digital cable receiver back panel Audio Out right (red) and Audio Out left (white) connectors.

b Into the HP Digital Entertainment Center back panel TV Source 1 In Audio right (red) and Audio left (white) connectors.

4Connect the set-top box Infrared Transmitter cable (required for signal). See “Infrared Transmitter Connection” on page 97.

Connecting TV

Connecting TV Source In 89