Remote Control Operation

Use the remote control to open the Media Center program; view TV, record TV programs, play previously recorded TV programs, and play music, movies, or video. See “Using the Remote Control” in the Media Center Edition 2005 Software Guide for detailed instructions on using the features of the remote control.

To use the remote control, just point it at the HP Digital Entertainment Center and press a button. Use the remote control at a maximum distance of 26 feet (8 meters) from the remote sensor and at a maximum of 45 degrees

(90 degrees total) from the center of the remote sensor.

The remote control will not operate until the HP Digital Entertainment Center is powered on and fully booted up.

On /Standby

HP Digital Entertainment Center z545

LED

90˚

~26

feet

n

Media Center must be in full-screen mode (or have focus) for consistent remote control operation. Performance may vary.

Indicator

Light

Remote operation
Installing the Remote Control Batteries

1Slide the battery cover off the back of the remote control.

2Insert the two AA alkaline batteries (provided). Make sure the battery positive and negative ends are inserted correctly!

3Replace the battery cover.

4Test the remote control by pressing any key. The indicator light should blink.

n

Use only alkaline batteries in the remote.

DVD MENU

TV

RADIO MUSIC PICTURESVIDEOS

RECORD PLAY STOP

REW FWD

PAUSE

REPLAYSKIP

OK

16HP Digital Entertainment Center