Installation Guidelines

To enhance the performance and extend the life of your HP Digital Entertainment Center:

w

An open-back is required for adequate cooling when installing your HP Digital Entertainment Center in an AV cabinet.

■Keep your HP Digital Entertainment Center in a well-ventilated area, away from excessive light, heat, or moisture.

■Keep ventilation slots clear of obstructions such as equipment or papers. The HP Digital Entertainment Center automatically turns off if it gets too hot.

17in

432 mm

On /Standby

HP Digital Entertainment Center

16.25in

412.75mm

4.5 in

114.3 mm

■This product is heavy. Exercise caution when lifting or moving.

■Place your HP Digital Entertainment Center on a stable, supported surface. Do not drop or place it on an unstable surface.

■Put your HP Digital Entertainment Center into Standby when not in use. In Standby, the On/ Standby button is lit amber. Preset recordings only start when the HP Digital Entertainment Center is on or in Standby.

■Adjust only those controls that are described in the operating instructions.

■Do not open your HP Digital Entertainment Center cabinet or attempt to service this product yourself. If your HP Digital Entertainment Center is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider.

w

Leave slots and openings in the HP Digital Entertainment Center cabinet open for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.

Choosing an HP Digital Entertainment Center setup location

If you intend to connect your HP Digital Entertainment Center to your TV, a set-top box, or a surround sound system, HP recommends that you choose a clear working area with easy access to the connectors of these devices. If your TV is wall-mounted, make sure that you have access to the rear ports on the TV before attempting to connect it to the HP Digital Entertainment Center.

24HP Digital Entertainment Center