HP z558, z556 Configuring Audio Output, speaker, setting, settings, DVD audio, Procedure, (TV Audio), Media Center

Configuring Audio Output

You must adjust the audio settings in two places after you have installed and connected the HP Digital Entertainment Center to your audio system.

Configure both the Media Center speaker settings and audio for the DVD player.

The following table shows which procedures to perform for your audio system. If you set up speakers using the Media Center Optional Components wizard, then set up the audio for the DVD player only.

Media Center
speaker
settings	DVD audio
(TV Audio)	setting	Procedure
2	2 speakers;	Default, no audio output configuration required.
(default)	Dolby Surround
	Compatible
	(default)
5.1	5.1	Change settings. See “Configuring audio for Media Center” on
		page 140 and “Configuring audio for the DVD player” on page 140.
7.1	7.1	Change settings. See “Configuring audio for Media Center” on
		page 140 and “Configuring audio for the DVD player” on page 140.
Digital Audio	Digital Audio	Change settings. See “Configuring audio for the DVD player” on
S/PDIF on	S/PDIF off	page 140.
(default)	(default)	If you use digital audio, the Media Center S/PDIF default setting is on,
		but the DVD Player S/PDIF default setting is OFF. You must change the
		DVD S/PDIF default setting to ON to hear all channels in DVD digital
		audio.

Initial Configuration

Initial Configuration 139