One Cable TV Box or Digital Cable Receiver (NTSC) and Antenna (ATSC)

To connect a standard set-top box (sold separately) and an HDTV/SDTV Ant. In input to your HP Digital Entertainment Center using a standard set-top box, satellite receiver, or digital cable receiver with S-video or composite video output, do the following:

1Make sure that a coaxial cable connector from your cable TV source (wall) is plugged into the set-top box or digital cable receiver In connector.

2Connect a video cable:

aChoose a video out connector:

■ Coaxial (RF)

■ Video (composite)

■ S-video

bConnect the video cable from the set-top

box or digital cable receiver back panel Video Output connector.

cConnect the video cable into the HP Digital Entertainment Center back panel TV Source 1 In connector.

3Connect stereo audio cables (skip this step if using coaxial [RF]):

a From the set-top box or digital cable receiver back panel Audio Out right (red) and Audio Out left (white) connectors.

b Into the HP Digital Entertainment Center back panel TV Source 1 In Audio right (red) and Audio left (white) connectors.

4Connect the coaxial cable from the UHF/VHF antenna into the HDTV/SDTV Ant. In HDTV/SDTV Ant. In connector on the back of the HP Digital Entertainment Center.

5Connect the set-top box Infrared Transmitter cable (required for signal). See “Infrared Transmitter Connection” on page 97.

84HP Digital Entertainment Center