Satellite Connection

(Location, availability, and number of connectors may vary.)

One Satellite Receiver (NTSC)

Source In

Connect the TV signal source from the satellite receiver into the HP Digital Entertainment Center.

If you are using a satellite receiver (sold separately) with S-video or composite video output, do the following:

1Make sure that a coaxial cable connector from your dish source is plugged into the satellite receiver In connector.

2Connect a video cable.

aChoose a Video Out connector:

■ Coaxial (RF)

■ Video (composite)

■ S-video

bConnect the video cable from the satellite receiver back panel video output connector.

cConnect the video cable into the HP Digital Entertainment Center back panel TV Source 1 In connector.

3Connect stereo audio cables (skip this step if using coaxial [RF]):

a From the satellite receiver back panel Audio Out right (red) connector and Audio Out left (white) connectors.

b Into the HP Digital Entertainment Center back panel TV Source 1 In Audio right (red) and Audio left (white) connectors.

4Connect the satellite receiver Infrared Transmitter cable (required for signal). See “Infrared Transmitter Connection” on page 97.

Connecting TV

Connecting TV Source In 93