Video Out Overview

Video Out Connection Overview

The back panel connector that you hook up to your TV is labeled Video Out.

Choose a Video Out connector and corresponding cable that attaches to the back of your TV:

Standard definition television:

■Video (composite)

■ S-video

■ Component (Y, Pb, Pr) High definition capable plasma, LCD, or HDTV display:

■Video (composite)

■ S-video

■ Component (Y, Pb, Pr)

■ VGA

■ DVI

Monitor:

■ VGA ■ DVI

n

Component video output requires specific configurations for certain display types and resolutions. Go to http://www.hp.com/ support and select your model number for instructions on using component video.

The type of video cable you need depends on your TV:

■If your TV has a composite video jack, you may need a composite video cable.

■If your TV has an S-video jack, you need an S-video cable. An S-video cable provides separate color and black-and-white image signals, and delivers a sharper image than a composite video cable does.

■For component video, see “Component Video Settings” on page 60.

To connect a TV to the HP Digital Entertainment Center, you may need a video cable and an audio cable. Use a video cable to connect the Video Out on the HP Digital Entertainment Center to your TV Video In. These cables are included in the box. You may need other or additional cables, depending on your TV or monitor.

When using an AV receiver, the Video Out cable can be connected directly to a TV and just the audio is connected and switched through an AV receiver, or video and audio are connected and switched through an AV receiver.

When using an AV receiver, do not switch video types such as connecting a Component In to a Composite Out. Not all AV receivers support signal conversion.

Some HP Digital Entertainment Center models output NTSC only.

58HP Digital Entertainment Center