11.SoftwareUpdate
Inorder to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the
Humaxwebsite to check the latest news and newly released software versions.
http://www.humaxdigital.com.
Itis recommended that you periodically check for the availability of software update.
11.1 OTA (Over the Air)OTA,an abbreviation of Over–the-Air, is a standard for the transmission of software through a broadcast system.
Themanufacturers reserve the right to decide when and where an update is made available. The new software version
isthen downloaded via cable. The software update via cable will only occur under the following circumstances.
**
1. The equipment should have appropriate loader software.
Caution: Pleasenote that if normal loader software is not equipped, the product may not be updated or
operateproperly after software update.
**
2. The manufacturer transmits the software via cable. The new version of the software is generally detected
automatically.
**
Caution:
• Pleasebe careful to keep the power on and the power cord plugged in during software update. If the power is off
duringsoftware update, fatal damage may be caused to the product.
• Pleasebe careful not to pull out the signal line (co-axial cable) during software update. Update may be interrupted
andthe product may not operate.
**
Note:
• Otherfunctions will not activate while software update takes place.
• Itmay take 5 ~10 minutes to update software.
• Schedulingoperation cannot work during software update.
1. If new software is found when powering on
1. A message will be displayed to notify that new software is found.
2. Select Yes and press the OK button to update the software.
3. Starts downloading new software. Please wait until the update is completed.
4. When completing the software update, the equipment is automatically powered off and on again.
11. Software Update