GB53
User’s Manual
In this chapter you can con gure the installation setting and perform channel search. Menus such as
channel search, software update and default setting are included in this section.
Note: Press the EXIT button to save the changes and return to the previous menu. Press the MENU
button to exit the menu screen.
9.1 Channel Search
1. Press the MENU button.
2. Select Installation using the / button and
press the OK button.
3. Select Channel Search using the/ button and
press the OK button.
4. Select Frequency and select the frequency.
You can enter the frequency directly using the
NUMERIC(0-9) buttons.
5. Select Symbol Rate and select the symbol rate.
You can enter the symbol rate directly using the
NUMERIC(0-9) buttons.
6. Select Network ID and select the network ID.
You can enter the network ID directly using the
NUMERIC(0-9) buttons.
7. Select Search and press the OK button. The
channel search will start.
8. To stop the search, press the OK button during
channel search.
9. The results will appear. Select Save and press the
OK button.
Note: If there are no channels available, a message
indicating the result will pop up.
9. Installation