9. Installation

9.2 Software Update

Software Update allows you to update the system software.

1.Press the MENU button.

2.Select Installation using the ￿/￿ button and press the OK button.

3.Select Software Update using the ￿/￿ button and press the OK button.

4.When new software is detected, you can choose to download the software immediately or save for later.

Note: When there is no new software to update, a popup will appear.

9.3 Default Setting

Tip: The default password is 0000.

Default Setting enables you to restore the product to the factory default.

Warning: Please note that one you perform Default Setting, all data such as antenna setting information, channel list and all user configured data will be deleted.

1.Press the MENU button.

2.Select Installation using the ￿/￿ button and press the OK button.

3.Select Default Setting using the ￿/￿ button and press the OK button.

4.Select Yes and press the OK button to restore all setting to factory default. To return to the previous menu, select No and press the OK button.

5.You will be prompted to enter your password again before starting to load default setting. Enter the password to proceed.

6.When default setting is completed, installation wizard pops up automatically and assists channel search.

Note: For detailed information about the installation wizard, refer to Chapter 3. Installation Wizard.

GB54

User’s Manual

Page 55
Image 55
Humax HDPVR-1000C manual Software Update, Default Setting, GB54