Manual Search
Youcan search channels manually by searching parameters, if you know the
multiplex-parameters(check with yourlocal broadcaster).
1. Press the DTV SETUP button.
2. Select Installation using the
GGGG̵/̷button, and press the
OK or ൘button.
3. Select Manual Search from
Installation menu using the
GGGG̵/̷button, and press the
OK or ൘button.
4. Select Channel,Frequency,Mode,
Guard Interval,or
Network Search
using the ̵/̷button, and press
the OK or ൘button.
Channel Number
Enter your desired frequency channel number to search. When entering frequency
channel number,the appropriate frequency value is automatically displayed in Frequency.
Select one of channel using the ̵/̷button, press the OK button.
Frequency
Enter your desired frequency to search directly.When entering the frequency,
the appropriate channel for the entered frequency is automatically displayed in Channel.
Enter frequency using the NUMERICAL (0~9) button and press OK button.
Mode
Required for Channel Search. If you don't know the value, please select Auto.
Select among Auto, 2k and 8k using the ̵V̷ button, and press the OK button.
Guard Interval
Required for Channel Search. If you don't know the value, please select Auto.
Select one option among Auto, 1/4,1/8,1/16 and 1/32 using the ̵/̷button,
and press the OK button.
Network Search
If specified frequency channel information and other channel information are
provided together,the channel, which belongs to other frequency channel,
is also searched. Select one option between Enable and Disable using the
൘button.
Installation
61. Installation