Humax LGB-26TPVR manual Setting the Analogue Channels Manually, UHF Cable

Setting the Analogue Channels

Setting the Analogue Channels Manually

The Manual Programme allows you to manually tune and arrange the channels in the order you desire. You can also assign a channel name with characters to each channel number. It's only for analogue TV mode.

1.Press the MENU button.

2. Select Channel using the ̵/̷ button, and press the OK or button.

3.Select Manual Programme using the ̵/̷ button, and press the

	OK or button.
4.	Select System using the ̵/̷ button, and press the		Gor button to select
	a particular system.
	BG : I : DK
5.	Select Band using the ̵/̷ button, and press the Gor			button to select
	a particular system.
	V/UHF : Cable
6.	If you know the channel number to be stored, select Channel using the ̵/̷
	button, and press the	, or NUMERICAL (0~9) button to select number.
	If you do not know the channel number, select Search using the ̵/̷Gbutton,
	and press the Gor	button to start search.
7.	Select Programme No. using the ̵/̷Gbutton, and press the				, or
	NUMERICAL (0~9) button to assign a programme number into the
	channel.
8. Select Name using the ̵/̷Gbutton, and press the OK or				Gbutton
	to change a name.
	To select a letter (A~Z, 0~9, +, -), press the ̵/̷Gbutton.
	To move on the previous or next letter, press the		Gor	button.
	To store the changing name, press the OK button.
9.	Select Fine Tune using the ̵/̷Gbutton, and press the			Gor	button to
	fine-tune the channel manually. If the signal is weak or distorted, you may
	have to fine-tune the channel manually.

10.When you are satisfied with your choice, press the BACK button to store the current setting values.

19. Setting the Analogue Channels