Software Upgrade

If new software is found when powering on

1.A message will be displayed to notify that new software is found.

2.Select Yes and press the OK button to update the software.

3.Starts downloading new software. Please wait until the updated is completed.

4.When completing the software update, the equipment is automatically powered off and on again.

If updating software from Menu

1.Press the DTV SETUP button.

2. Select Installation using the GGGG̵/̷ button, and press the

OK or button.

3.Select Software update using the ̵/̷ button, and press the

OK or button.

Automatic Update

You can set the LCD-TV to find HUMAX software updates and update software automatically.

1.Select Automatic Update using the ̵/̷ button, and press the

OK or button. Automatically search for new software.

2.When detecting updated software, the following result is displayed. If new software is not found by Automatic Update, use Manual Update.

3.Select Yes and press the OK button to start updating. Select No and press the OK button to return to

the previous menu without updating. Select Later and press the OKbutton to update later. That means the update menu displays as soon as you turn on the LCD-TV next time.

4.Performs Software Update. Please wait until it is completed.

5.When completing the software update, the LCD-TV is automatically powered off and on again.

64. Software Upgrade

Page 65
Image 65
Humax LGB-26TPVR manual If new software is found when powering on, If updating software from Menu