Automatic Search

If your LCD-TV is connected to a suitable aerial(outdoor aerial recommended)

you can automatically search channels without entering any other information.

1. Press the DTV SETUP button.
2. Select Installation using the
GGGG̵/̷button, and press the
OK or ൘button.
3. Select Automatic Search from
Installation menu using the
GGGG̵/̷button, and press the
OK or ൘button.

Search

Please wait while the LCD-TV searches for the channels,this may take a few minutes.

1. During the automatic search
procedure, the cursor is located at
Stop. If you press the OK button
during the search, the operation is
stopped and the channels found thus
far will be displayed.
2. If despite successful completion of
search operation the some or all
channels have been not found,
press the OK button and perform
to reset the search operation again
if necessary.
3. You can delete unnecessary channels
from the found channels. Select your
desired channels to delete and press
the OK button. Then select Delete
and press the OK button.
Todelete all channels, select
Select All to select all channels,
select Delete, and press the
OK button.
4. When completing Channel Search
and deleting unnecessary channels,
select Save to save the changes.
Installation
60. Installation