IBM AS/400E manual 90

The network table contains the networks and the Internet address associated with
the network. Socket applications use the getnetbyname() and getnetbyaddr()
functions to access the information in the network table (Figure 70).
The protocols and services tables that are shipped contain standard information.
The network tables do not contain any information. The network IBM information
has been added in Figure 70, as an example.
Work with Protocol Table Entry
System: SYSNAM03
Type options, press Enter.
1=Add 4=Remove 5=Display
Protocol
Opt Protocol number
_ _____________________________
_ icmp 1
_ip 0
_ tcp 6
_ udp 17
Bottom
Parameters for options 1 and 4 or command
===> ______________________________________________________________________
F3=Exit F4=Prompt F5=Refresh F6=Print list F9=Retrieve F12=Cancel
F17=Top F18=Bottom
Figure 69. Work with Protocol TableEntry Display
Work with Network Table Entry
System: SYSNAM03
Type options, press Enter.
1=Add 4=Remove 5=Display
Internet
Opt Network address
_ _____________________________________ _______________
_ IBM 9.0.0.0
Bottom
Parameters for options 1 and 4 or command
===> ______________________________________________________________________
F3=Exit F4=Prompt F5=Refresh F6=Print list F9=Retrieve F12=Cancel
F17=Top F18=Bottom
Figure 70. Work with Network TableEntry Display
90 OS/400 TCP/IPConfiguration and Reference V4R4