Specify the name of the PPDS printer. This name is equal to the PPDS queue that
you want to create.
For the COMMAND to run for the printer output field, specify the name of the AIX
output queue asc, not the name of the PSF queue.
Verifying Your Configuration of PSF/6000
Totest that the path between the RS/6000 system, PSF/6000 queue, and the
PSF/6000 printer is correct, specify the following:
enq -P psf6k /etc/qconfig
where psf6k is the name of the PSF/6000 queue.
If the file prints correctly, you can send and printAS/400 spooled files with AFP and
SCS data stream on the RS/6000 printer.
When sending spooled files to PSF/6000, always specify *OTHER for the LPR
destination type parameter.
For AFPDS, specify *NO for the transform SCS toASCII parameter. We used the
AFP Utilities licensed program with the

Start AFP Utilities

(STRAFPU) command on
the AS/400 system to create an overlay that is named OVERLAY. It is this AFPDS
spooled file that you sent to the RS/6000 RCHRS001 in Figure 224. PSF/6000
converts the AFPDS data stream into PPDS automatically.For more information
about the AFP Utilities licensed program, see

AFP Utilities/400 User’s Guide and

Reference
, SH18-2416.
For the SCS data stream, you must specify *YES for the Transform SCS toASCII
parameter. TheAS/400 converts the SCS data stream from EBCDIC to ASCII (by
Send TCP/IP Spooled File (LPR)
Type choices, press Enter.
Remote system ......... rchrs001
Printer queue ......... 'psf6k'
Spooled file.......... overlay Name
Jobname............ p23xyg41f Name, *
User............. hans Name
Number............ 060045 000000-999999
Spooled file number ...... *ONLY 1-9999, *ONLY, *LAST
Destination type........ *OTHER *AS400, *PSF2, *OTHER
Transform SCS to ASCII..... *no *YES, *NO
Bottom
F3=Exit F4=Prompt F5=Refresh F10=Additional parameters F12=Cancel
F13=How to use this display F24=More keys
Figure 224. SendingAFPDS to PSF/6000
Chapter11. Line Printer Requester (LPR) 361