7. Press the Enter key.The following display appears:8. Do one of the following:

Table47. Trace Status

If the TraceStatus Is Go to Step

Waiting 9on page498

Error 1on page 499 ( Formatting and Saving the

Communications Trace)

Other than waiting or error 12on page 498

Select Trace Options
Configuration object....... TRNLINE
Type .............. LINE
Select one of the following:
1. All data (no filtering)
2. Remote controller data
3. Remote MAC address data
4. Remote SAP data
5. Local SAP data
6. IP protocol number
7. IP address data
Selection
1
F3=Exit F5=Refresh F12=Cancel
Work with Communications Traces
Type options, press Enter.
2=Stop trace 4=Delete trace 6=Format and print trace
7=Display message 8=Restart trace
Configuration
Opt Object Type Trace Description Protocol Trace Status
TRNLINE LINE TCP/IP TRACE TRN ACTIVE
F3=Exit F5=Refresh F6=Start trace F10=Change size
F11=Display buffer size F12=Cancel
Chapter21. TCP/IPProblem Analysis 497