Cause List A
1. Check to see that the REXEC server is running. If not, start it with the
STRTCPSVR SERVER(*REXEC) command.
2. If the message ″Connection refused″is returned to the REXEC client, check the
exit program associated with the exit point QIBM_QTMX_SERVER_REQ. This
exit program has either specified that the connection should be rejected,
returned a value that is not correct for the Allow Operation parameter,or ended
abnormally. Examine the REXEC server job log for messages. Resolve any
problems with the exit program and install the corrected version.
Cause List B
1. Check your user ID and password by logging on to the system. If you are
unable to do so, contact the system administrator to verify that your user ID and
password are correct.
2. Check the exit program associated with exit point
QIBM_QTMX_SERVER_LOGON (if any). This exit program has either specified
that the connection should be rejected, returned a value this is not correct for
the Allow Operation parameter,or ended abnormally. Examine the REXEC
server job log for messages.
Cause List C
1. Check for any job log messages returned to the REXEC client. Resolve any
indicated problems and try the command again.
2. If the message ″Command Rejected″is returned to the REXEC client, check the
exit program associated with the exit point QIBM_QTMX_SERVER_REQ. This
exit program may be specifying that the command should be rejected, returning
a value this is not correct for the Allow Operation parameter,or ending
abnormally. Examine the REXEC server job log for messages. Resolve any
problems with the exit program and install the corrected version.
Figure 283. REXEC Server ProblemAnalysis
490 OS/400 TCP/IPConfiguration and Reference V4R4