When you want to end the group job, use the End Group Job (ENDGRPJOB)
command.
When you are in a Telnetsession, you can switch to another group job by pressing
the ATTNkey and then typing TFRGRPJOB on the command line.
Workstation Type Negotiations and Mappings
Table19 shows a list of virtual display stations that the server system uses to match
the physical display stations of the client system.
If you are not sure what emulation package you are running, you need to determine
what your virtual display device is. Youcan use the Work with Job (WRKJOB)
command to find out what it is. Youare shown the job name at the top of the
display.This is the name of the virtual display device associated with your job. By
default, the naming convention is QPADEV

xxxx

, where

xxxx

is an alphanumeric
character.
Todetermine the device type, type:
WRKCFGSTS *DEV QPADEVxxxx
Youcan work with your device description. Type an 8 (Work with description) next
to the name of the device. Youare shown the device type. You can then determine
from the device type whether you are running in full-screen mode for 3270, 5250,
VT100, or VT220.
Chapter6. TelnetServer 229