Youcan also return to the Tokyo system using option 11 (Transfer to previous
system). Option 11 sends you to the alternate job at theTokyo system (Figure 134).
1. Press the System Request key.
2. Select option 11 (Transferto previous system). You return to the Tokyo system.
From the alternate job at Tokyo,you now want to return to the Chicago system
(Figure 135). Youcan return to the Chicago system using one of the following:
vSIGNOFF command
vTFRSECJOB command
Youcan use the Transfer Secondary Job (TFRSECJOB) command to transfer
from an alternate job at a client system to the original job, which is running
Telnet;therefore, you end up at the server system. In Figure 135, the
TFRSECJOB command transfers you to your original job on the Tokyosystem,
which is still running Telnet;therefore, you end up on the Chicago system.
vOption 1 on the System Request menu (Display sign on for alternative job)
Youwant to return to the Chicago system after going back to the Tokyo System
Request menu (Figure 136on page 224). Do one of the following to return to the
Chicago system:
vFrom the TokyoSystem Request menu, press F3 (Exit).
vFrom the TokyoSystem Request menu, select option 15 (Transfer to end
system).
Figure 133. Starting the System Request at Previous System
Figure 134. Transferringto the Previous System
Figure 135. Transferringa Secondary Job
Chapter6. TelnetServer 223