IBM AS/400E Preferred address:, SMTP user ID, SMTP domain

5. If you specified 3 (SMTP) for Preferred address , follow the remaining steps for
SMTP.If you specified 1 (User ID/Address) for
Preferred address: , skip to the
end of this section.
6. Press F19 (Add name for SMTP). Fill in the
SMTP user ID and SMTP domain
fields. Press Enter.
Important!:
IBM recommends that you use the same name for your user profile
and your SMTP user ID. IBM also recommends that this name be
the same as your ID in the system distribution directory.
The SMTP domain field must be in the format:
hostname.domain
Type choices, press Enter
Mail service level . . 2 1=User index
2=System message store
3=Other mail service
For choice 3=Other mail service:
Field name .... __________ ______ F4 for list
Preferred address: ...3 1=User ID/Address
2=O/R Name
3=SMTP Name
4=Other preferred address
Address type .....________ F4 for list
For choice 4=Other preferred address:
Field name .... __________ ______ F4 for list More...
F3=Exit F4=Prompt F5=Refresh F12=Cancel F18=Display location details
F19=Add name for SMTP
Figure 188.Add Directory Entry (ADDDIRE) — Display 2
Add Name for SMTP
Type choices, press Enter.
User ID........:USER1
Address........:SYS1
SMTP user ID ......:USER1___________
SMTP domain.......:SYS1.MyTown.MyCompany.COM________________________
_________________________________________________________________________________
_________________________________________________________________________________
_____________________________________________
SMTP route .......:__________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_____________________________________________
Figure 189.Add Name for SMTP Display
Chapter9. Post Office Protocol (POP) Mail Server 291