Note: If they are installed, the Client Access host servers are automatically started
when TCP/IP is started.
Changing the IPL Start-Up Program The autostart job in the controlling subsystem
transfers control to the program specified in the system value QSTRUPPGM. You
can tailor this program. For instructions on how to create your own IPL start-up
program, see the

OS/400 Work Management

book located in the AS/400 Online
Library at the following URL address: http://www.as400.ibm.com/infocenter.
REMINDER: Host Table Conversion: If you had a pre-V3R1M0 version ofTCP/IP
installed on your AS/400 and you had a local host table with more than 75 entries,
use one of the host table configuration commands, such as CHGTCPHTE or
MRGTCPHT before you run the STRTCP command. Using the host table
configuration commands converts pre-V3R1M0 host tables to the new format
without affecting the performance of the STRTCP command processing.
TCP/IP Jobs
Jobs started by the Start TCP/IP (STRTCP) command are listed in Table2.
Table2. Jobs Used by TCP/IP
Job Name Description
QAPPCTCP APPC over TCP/IP applications
QTBOOTP BOOTPserver
QTCPIP Main TCP/IP job
QTFTPxxxxx FTPserver (there may be several)
QTGTELNETS TELNET server (there may be several)
QTRTDxxxxx RouteD server
QTRXCxxxx REXEC server (there may be several)
QTSMTPCLNT SMTPclient
QTSMTPSRVR SMTPserver
QTSMTPBRCL SMTPbridge client
QTSMTPBRSR SMTPbridge server
QTTFTxxxxx TFTP server (there may be several)
QTMSNMP SNMPserver
QTMSNMPRCV SNMP server
QSNMPSA SNMPserver
QTLPDxxxxx LPD server (there may be several)
QTPOxxxxxx POP server (there may be several)
QTPPANSxxx Dial-in (*ANS) support (PPP)
QTPPDIALxx Dial-out (*DIAL) support (PPP)
ADMIN and DEFAULT ICS (HTTP) server
QTWSGxxxxx Workstation gateway (there may be several)
Chapter2. Configuring TCP/IP 45
|
|
|
|
|
|