IBM P5 570 manual Model D10 I/O drawer physical package

The drawer has the following attributes:

￿4U rack-mount enclosure that can host one or two D10 drawers

￿Six adapter slots

–Five PCI-X slots: 3.3 V, keyed, 133 MHz blind-swap hot-plug

–One PCI slot: 5 V, keyed, 33 MHz blind-swap hot-plug

￿Default redundant hot-plug power and cooling devices

￿Two RIO-2 and two SPCN ports

Note: The 7311 Model D10 I/O drawers require FC 6431 to ensure RIO-2 port capability, or an upgrade to RIO-2 is requested to support the connection to the p5-570 system.

7311 Model D10 I/O drawer physical package

Because the 7311 Model D10 I/O drawer must be mounted into the rack enclosure (FC 7311), these are the physical characteristics of one I/O drawer or two I/O drawers side-by-side:

￿One 7311 Model D10 I/O drawer

–Width: 223 mm (8.8 in)

–Depth: 711 mm (28.0 in)

–Height: 175 mm (6.9 in)

–Weight: 19.6 kg (43 lb)

￿Two I/O drawers in a 7311 rack-mounted enclosure have the following characteristics:

–Width: 445 mm (17.5 in)

–Depth: 711 mm (28.0 in)

–Height: 175 mm (6.9 in)

–Weight: 39.1 kg (86 lb)

Figure 1-2 on page 8 shows the different views of the 7311 Model D10 I/O drawer.

Front view

Two redundant power supplies

Two I/O drawers side by side

Rack	Rear view
Indicator
Port
SPCN Ports

RIO Card

Slots: 1 2 3 4 5 6

Figure 1-2 7311-D10 I/O drawer views

8p5-570 Technical Overview and Introduction