where:
nThe number of dot-spaces in the thermal print station or half-dot
spaces in the impact print station.
Default:
n=03
Maximum:
n=08
Remarks:
If you select double-width printing, the space to the right of each character
is doubled.
Set Inter-Character Spacing –DBCS
RS-232 Syntax:
ESC T nor X'1B;52;n'
where:
nThe number of dot-spaces in the thermal print station or half-dot
spaces in the impact print station.
Default:
n=06
Maximum:
n = 20 hex (32 decimal)
Remarks:
If you select double-width printing, the spacing on the right side of each
character is doubled.
Set or Cancel Rotated Characters
RS-232 Syntax:
ESC V nor X'1B56;n'
where:
n=00 Cancel Rotated Characters
n=01 Set Rotated Character
n=02 Code Page 863 - Canadian-French
Default:
n=00
Remarks:
Rotation is 90 degrees clockwise. This command is supported only in the
thermal print station.
Set Print Station Parameters
RS-232 Syntax:
ESCc1nor X'1B6331;n'
where:
nSpecifies the print station.
Bit # ↓Station
updated March 18, 2002
130 SureMark DBCS User’s Guide