IBM TG5, TM7, TI5, TF7 manual Updated March 18

updated March 18, 2002

–For SBCS code pages 932, 950, 1381: 8 full-dot wide character + 3 half-dot space

Font A: 150 half-dots per inch ⇒ 24 characters per line

Font B: 120 half-dots per inch ⇒ 19 characters per line

You can choose the character size of the one user-defined character set (code page) within the following parameters:

v4 ≤ half-dot width ≤ 16

v4 ≤ dot height ≤ 16

Notes:

1.Any of the impact printing fonts can be printed double-wide, double-high, or both double-wide and double-high. For better print quality with double-high characters, set the printer to unidirectional print mode. See “Set or Cancel Unidirectional Printing” on page 135.

2.User-defined characters greater than 9 dots high cannot be printed in landscape mode.

3.The document print line is 80.35 mm (3.16 inches) long. There are 474 half-dots per line for font A, and 379 half-dots per line for font B.

4.You can print in two densities on the impact printer: 120 half-dots per inch or 150 half-dots per inch. Refer to the description of bits 0 and 1 in “Set Print Mode” on page 125 for information about changing the density.

Appendix B. Technical Information 95