IBM X21, X23, X24, X22, X20 manual Hibernation mode Note for Windows NT, Power switch mode Hibernation

vThe resume timer is set. In Windows 98, the Scheduled Tasks setting has priority over the Resume on timer selection in the “Power Management Properties” window.

Note: The computer does not accept any input immediately after it enters suspend mode. Wait a few seconds before taking any action to reenter operation mode.

Hibernation mode

Note for Windows NT

A Windows NT user cannot create a hibernation file in a Windows NT system that uses NTFS format, the Windows NT default format. If you want to use hibernation mode, you will need to reinstall Windows NT with FAT format.

In hibernation mode, the following occurs:

vThe system status, RAM, VRAM, and setup data are stored on the hard disk.

vThe system is powered off.

Notes:

1.In the ThinkPad Configuration program, the computer can be set to suspend/hibernate while docked.

2.The computer cannot enter hibernation mode when it is powered with AC power and a communication PC Card is used.

3.If the computer enters the hibernation mode when it is docked to the docking station, do not undock it from the docking station before resuming normal operation. If you do undock it, then if you try to resume normal operation, you will get an error message, and you will have to restart the system.

Any one of the following events causes the computer to enter hibernation mode:

vThe Fn + F12 keys are pressed.

vThe power switch is turned off and the mode is set to

Power switch mode Hibernation.

vThe timer conditions are satisfied in suspend mode (for operating systems other than Windows 98).

30ThinkPad X20, X21, X22, X23, X24