Ingersoll-Rand 80445364 manual XS1, QF1, FR1, FR2, FR3, Edv, 1ATS, 1RPS, Pto

14 GENERAL INFORMATION

TN, TT, IT 3+PE. 220−230V, 60Hz. 380−460V, 50Hz.

KEY

Alternative wiring for 3 phase, neutral and protective earth power supply.

XS1	Main terminals
QF1	Fan motor starter
QF1.1	Auxiliary contact
FU4, 5	Dryer fuses
FU1, 2	EDV fuses
FR1	Solid state relay
FR2	Solid state relay
FR3	Solid state relay
EDV	Electric drain valve
DR	Variable speed drive
MM	Main motor
FM	Blower motor
MC	Dryer motor
ES	Emergency stop
1ATS	High air temperature switch
1RPS	Dryer refrigeration pressure switch
PTO	Thermistor, motor winding temp.
P1, P2	Pressure transducer
DO	Dryer option
CA	Common alarm
WHT	White

RED Red

DDP Dryer discharge pressure (Dryer option)

ADP Aftercooler discharge pressure

220/230 NN Alternate wiring for 230v power supply with no neutral available.

WIRES

POWER − Black

DC CONTROL − Blue

NEUTRAL − Light blue

PROTECTIVE EARTH − Green / Yellow

NOTES

1.THE CORRECT TYPE AND RATING OF LINE INPUT FUSE MUST BE FITTED ONTO THE CUSTOMERS ISOLATOR OR BREAKER CLOSE TO THE COMPRESSOR.

FAST ACTING CLASS−J, T OR SEMICONDUCTOR TYPE, CURRENT LIMITING, INTERRUPT RATING − 200,000 AMPS RMS

SECTION

2.SIZING OF ELECTRICAL COMPONENTS NOT SUPPLIED BY INGERSOLL RAND IS THE RESPONSIBILITY OF THE CUSTOMER AND SHOULD BE DONE IN ACCORDANCE WITH THE INFORMATION ON THE COMPRESSOR DATA PLATE, N.E.C., AND LOCAL ELECTRICAL CODES.

3.DECAL MUST CONFORM TO THE LATEST REVISION OF IR SPECIFICATION 92−8.95.

en http://air.ingersollrand.com