Ingersoll-Rand 80445364 manual Compressor, Motor, Cooling System − Air cooled, General Data

			INSTALLATION / HANDLING				23
60/50Hz		IRN 20HP/ 15 kW		IRN 25HP / 18.5 kW
	TAS		non−TAS	TAS		non−TAS
COMPRESSOR
Nominal pressure		150			150
PSIG (bar)		(10.34)			(10.34)
Flow rate @ 150 PSIG (10.3 bar)	75		77	92		94
ACFM (m3/MIN) 1, 4	(2.12)		(2.18)	(2.61)		(2.66)
Flow rate @ 125 PSIG (8.6 bar)	80		83	99		102
ACFM (m3/MIN) 2, 4	(2.27)		(2.35)	(2.80)		(2.89)
Flow rate	84		87	105		108
@ 115 PSIG (8 bar) ACFM (m3/MIN) 3, 4	(2.38)		(2.46)	(2.97)		(3.06)
Airend discharge temperature.			228_F (109_C) Trip point
Ambient operating temperature			35_F (+2_C) → 104_F (+40_C)
(min.) → (max.)
MOTOR
Nominal power		20HP / 15kW			25HP / 18.5kW
Insulation class			F
COOLING SYSTEM − Air cooled
Cooling air flow			1900ft3/min (53.8m3/min)
Maximum ∆P in air ducts			0.25 inWg (6.4mmH2O)
Compressed air outlet ∆T	N/A		15_F (8.3_C)	N/A		20_F (11_C)
GENERAL DATA
Separation volume			1.8 gallons	(7 Litres )
Coolant capacity			3.4 gallons	(13 Litres )
Weight − base mount unit			1350 lbs (612 kg)
Weight − 120 gallon Receiver mounted			1720 lbs (780 kg)
Weight − 240 gallon Receiver mounted			1891 lbs (858 kg)
Weight − 500 Litre Receiver mounted			1772 lbs (804 kg)
Weight − 750 Litre Receiver mounted			1891 lbs (858 kg)

DRYER ENGINEERING DATA

50 / 60Hz

Electrical protection class (std)	NEMA 1
	(IP 20)
Factory refrigerant charge (oz/g)	23.5 oz
	667 g
Refigeration type	134 A

1Assuming a 5 psi (0.34 bar) pressure drop through the TAS module.

2Assuming a 8 psi (0.55 bar) pressure drop through the TAS module.

3Assuming a 9 psi (0.62 bar) pressure drop through the TAS module.

4Flow rate will decrease as DP through the TAS module increases.

http://air.ingersollrand.com en