Insignia NS-DVDR1 Using the Setup Menu, Menu, HOME, HOME, Note, Menu, CATV, Photo, Music, SETUP, Start, ENTER, ENTER, Start, Audio, RETURN, General, Settings, Language, Settings

NS-DVDR1 DVD Recorder

Menu	Available options
Photo	• DISC: Displays the Photo menu for
(See “Photo	a disc.
List menu
options” on
page 19)
Music	• DISC: Displays the Music (or Audio
(See “Audio	CD) menu for a disc.
CD and Music
menu options”
on page 18)
	• Dubbing: Displays the Dubbing
	menu.
	• Disc Manager: Displays the Disc
Easy Menu	Setup menu.
	• Rec. Mode: Displays the Record
	Mode setup menu.
	• DV Input: Changes to DV Input
	mode.

Using the Setup Menu

In this menu system there are several ways to customize the settings. Most menus consist of three levels to set up the options, but some require more levels for some settings.

To change settings using the Setup menu:

1Press HOME. The Home menu opens.

2Select SETUP and Start, then press ENTER. The Setup menu opens with the General Settings icon highlighted.

3Press / to select the option you want, then press to move to the second level.

4Press / to select the second option you want, then press to move to the third level.

5Press / to select the setting you want, then press ENTER to confirm your selection. Some items require additional steps.

6Press RETURN or HOME to exit the Setup menu.

Note Press to go back to the previous level.

Menu	Available settings
General	Tuning Band–You can select TV or
Settings	CATV.
	Auto Channel Set–PressStart to begin
	auto channel selection.
	CH. Add/Del–You can manually add or
	erase channels from memory.
	Clock Set–You can manually or
	automatically (using XDS) set the clock.
	TV Aspect–You can select from 4:3
	Letter box, 4:3 Pan scan, or 16:9 Wide.
	Progressive Scan–You can turn on
	progressive scan video, which provides
	the highest quality pictures with less
	flickering.
	If you are using the Component Video
	Out/ Progressive Scan jacks, but are
	connecting the recorder to a standard
	(analog) television, set Progressive Scan
	to OFF.
	If you are using the Component Video
	Out/ Progressive Scan jacks for
	connection to a TV or monitor that is
	compatible with a progressive scan
	signal, set Progressive Scan to ON.
	Caution: Once the setting for progressive
	scan output is entered, an image will only
	be visible on a progressive scan
	compatible TV or monitor. If you set
	progressive scan to ON by mistake, you
	must reset the recorder. To do this,
	remove the disc, then press STOP (	)
	and hold it for five seconds before
	releasing it. The video output will be
	restored to the standard setting, and a
	picture will once again be visible on a
	conventional analog TV or monitor.
	Power Save Mode–You can set Power
	Save Mode to ON to enable an economic
	power save mode.
	Factory Set–You can reset your recorder
	to original factory settings.
Language	Display Menu–You can select a
Settings	language for the setup menu and
	information display.
	Disc Menu–You can select a language
	for the DVD menu.
	Disc Audio–You can select a language
	for the DVD audio.
	Disc Subtitle–You can select a language
	for the DVD subtitle.
Audio	Dolby Digital/DTS/MPEG–You can
Settings	select Bitstream (if you connect to
	equipment with Dolby Digital, DTS, or
	MPEG decoder), or PCM (to
	automatically downmix to two-channel
	PCM audio).
	Sampling Freq.–You can select 96 kHz
	or 48 kHz (if your receiver or amplifier is
	not capable of decoding 96 kHz signals).
	DRC (Dynamic Range Control)–You
	can set the DRC to On if you want to
	listen to a movie at a lower volume,
	without losing clarity.
	Vocal–You can set the Vocal to ON when
	a multi-channel karaoke DVD is playing.
	This mixes the karaoke channels on the
	disc into normal stereo sound.

14 www.insignia-products.com