NS-DVDR1 DVD Recorder

5

recording. The new title is created and the

Reference

Press STOP (

) to stop the overwrite

 

 

updated menu is displayed.

Controlling your TV with the supplied

Note

• This function is not available for a

multi-brand remote control

You can control the sound level, input source,

 

protected title.

 

• If the overwrite is longer than the

and power switch of your TV with the supplied

 

recording length of the current title, the

multi-brand remote control.

 

next title is overwritten. If the next title

You can control your TV using the following

 

is protected, the overwriting stops at

 

buttons.

 

the starting point of the title.

 

 

 

• If the selected title’s recording length is

 

 

less than 10 seconds, the next title is

 

 

overwritten. But if the next title is

 

 

protected, overwriting stops.

 

Viewing the Title List menu displayed on other DVD

 

recorders or players

+RW +R

 

You can view the Title List menu displayed on the other DVD player that is capable of playing DVD+RW or DVD+Rs.

To view the Title List menu:

1Insert a previously recorded DVD+R or DVD+RW disc.

2Press TITLE in Play mode or DVD tuner mode. The Title List menu opens.

3To play back a title, select the title you want, then press ENTER or PLAY ( ).

Tip You can remove the Title List menu by pressing STOP ( ).

Playing your recordings on other DVD players (finalizing a disc)

Most regular DVD players can play finalized discs recorded in Video mode, finalized DVD+R, or DVD+RWs. A small number of players can also play DVD-RWs recorded in VR mode, finalized or not. Check the manual that came with the other player to check what formats it will play.

Finalizing “fixes” the recordings and editings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.

Finalizing a Video mode disc creates a menu screen for navigating the disc. The menu can be accessed by pressing DISC MENU/LIST or

TITLE.

To finalize a disc, refer to “Disc Settings” on page 15.

Note

Unfinalized DVD+RWs are playable on

 

 

regular DVD players.

 

The edited contents of a DVD+RW

 

 

disc is compatible with regular DVD

 

 

players only after finalization.

The edited contents of a DVD+R disc is not compatible with regular DVD players. (Hide, chapter combine, added chapter mark, and so on.)

How long finalization takes depends on the type of disc being finalized, how much is recorded on the disc, and the number of titles on the disc.

 

Press

 

To...

 

 

 

 

 

POWER

Turn the TV on or off

 

 

 

 

 

INPUT

 

Switch the TV’s input source between the TV and

 

 

 

other input sources.

 

 

 

 

 

CH +/–

Scan up or down through memorized channels

 

 

 

 

 

VOL +/–

 

Adjust the volume of the TV

 

 

 

 

 

MUTE

 

Temporarily turn TV sound OFF. Press again to

 

 

 

restore.

 

 

 

 

 

 

 

 

 

Note

 

Depending on the you are connecting, you

 

 

 

may not be able to control your TV using

 

 

 

some of the buttons.

 

 

 

 

Controlling other TVs with the multi-brand remote control

You can control the sound level, input source, and power switch of non-LG TVs as well. Enter the appropriate manufacturer code from the table below.

To enter the manufacturer code:

1While holding down the TV POWER button, press the number buttons to select the manufacturer code for your TV (Refer to table).

2Release the TV POWER button. The remote control is set to control the TV.

28

www.insignia-products.com