Insignia NS-DVDR1 manual 33

NS-DVDR1 DVD Recorder

The	No disc is inserted	Insert a disc (make sure that
recorder		the disc indicator in the display
does not		window is lit)
start
	An unplayable disc	Insert a playable disc. (Check
playback
	is inserted	the disc type and Regional
		code.)
	The disc is placed	Place the disc with the
	upside down	playback side down
	The disc is not	Place the disc on the disc tray
	placed within the	correctly inside the guide
	guide
	The disc is dirty	Clean the disc
	The Rating level is	Cancel the Rating function or
	set	change the rating level
The remote	There is an obstacle	Remove the obstacle
control does	in the path of the
not work	remote control and
correctly	your recorder
	The batteries in the	Replace the batteries with new
	remote control are	ones
	exhausted
	The remote control	Point the remote control at the
	is not pointed at the	remote sensor of the recorder
	remote sensor of
	the recorder
	The remote control	Operate the remote control
	is too far from the	within 23ft (7m)
	recorder
The	The camcorder is	Turn camcorder on and
camcorder	off	operate it correctly
image is not
shown
The	The recorder’s	Use INPUT to select the
camcorder	source is set	correct input channel (AV1,
image is not	incorrectly	AV2 or DV IN)
shown on
TV screen
Timer	The recorder clock	Set the clock to the correct
recording is	is not set to the	time
not possible	correct time
	The timer has been	Reprogram the Timer
	programmed
	incorrectly
	The TIMER Record	Reprogram the Timer and turn
	indicator light does	off the recorder to enable the
	not appear after	timer
	programming the
	timer
Picture or	Antenna or cables	Tighten connections or replace
sound of a	are loose	the cable
channel is
weak or	Wrong tuning band	Try Tuning Band Select
missing	is selected in the	options. See “Using the Setup
	Recorder Setup	Menu” on page 14
	menu.

Cannot play	The disc was	Finalize the disc. See “Disc
disc a	recorded in Video	Settings” on page 15.
recorded on	mode
your
	Some players will	No solution
recorder on
another	not play even a
DVD player.	finalized disc
	recorded in Video
	mode
	The disc was	The other player must be RW
	recorded in VR	compatible in order to play the
	mode	disc
	Discs recorded with	No solution
	copy-once material
	cannot be played on
	other players
Cannot	The remaining	Use another disc
record or	blank space on the
did not	disc is insufficient
record
successfully	The source you are	You cannot record the source
	trying to record is
	copy-protected
	When setting the	Select the channel on the
	recording channel,	recorder’s built-in TV tuner by
	the channel is tuned	setting the TV tuner to the
	on the TV’s own	recorders RF output channel.
	tuner.
	When recording to a	Use a VR mode formatted disc
	Video mode disc,	for copy-once material
	programs that are
	copy-once
	protected cannot be
	recorded
Stereo	TV is not	No solution
Audio	Stereo-compatible
Record or
		No solution
Playback is	Broadcast program
not present	is not in stereo
	format
	Recorder A/V Out	Make A/V connections. Stereo
	jacks are not	is available only on A/V output
	connected to TV	from recorder.
	A/V In jacks
	Recorder	Select AUX or A/V source as
	Audio/Video Out is	TV input
	not selected for
	viewing at the TV
	Recorder’s TV	Set TV audio channel mode to
	audio channel is set	Stereo. See “Changing the TV
	to SAP or MONO.	audio channel” on page 16.

www.insignia-products.com 31