Configuring the DPC-8.5—Continued

Progressive Setting

With this setting you can adjust various picture parame- ters for progressive scanning. There are three setup memories (1, 2, 3) for storing your favorite settings. You could, for example, use one for daytime viewing (e.g., sun shining through window) and one for nighttime viewing (e.g., curtains drawn, lights down).

Parameter

Range

Description

Contrast

–7...0...+7

Adjusts the picture

contrast.

 

 

 

 

 

Brightness

–7...0...+7

Adjusts the picture

brightness.

 

 

 

 

 

Color

–7...0...+7

Adjusts the picture color.

 

 

 

Tint

–7...0...+7

Adjusts the picture tint.

 

 

 

Sharpness

0...+7

Adjusts the picture

sharpness.

 

 

 

 

 

1

Remote controller

Enter

 

Select Progressive Setting 1, 2,

 

or 3, and then press the [Enter] or

 

Right [ ] button.

 

The parameters appear onscreen.

2

Use the Up and Down [ ]/[ ] but-

Remote controller

tons to select the parameters,

 

press [Enter], and use the Left

 

and Right [ ]/[ ] buttons to set

Enter

them.

 

3

When you’ve finished, press the

 

Remote controller

[Enter] button.

 

The settings are stored.

Enter

Use the same procedure to set the other

 

 

parameters, pressing [Enter] when

 

you’ve set each one.

 

Press the [Setup] button to exit the

 

onscreen setup menu.

Notes:

These settings are used only when the Progressive function is on.

Audio Menu

Digital Out/Digital1 (OPTICAL)

With these settings you can determine how the DPC-8.5 outputs digital audio from its OPTICAL DIGITAL AUDIO OUTPUT. The options you choose will depend on the type of component that you connect.

Dolby Digital Out

With this setting you can configure the OPTICAL DIG- ITAL AUDIO OUTPUT to output Dolby Digital audio as it is or to downmix it into 2-channel PCM.

Dolby Digital (default)

Choose this option if you’re connecting a component with a built-in Dolby Digital decoder.

Dolby Digital > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input, an AV receiver with a built- in Dolby Pro Logic decoder, or an external D/A converter.

DTS Out

With this setting you can configure the OPTICAL DIG- ITAL AUDIO OUTPUT to output DTS audio as it is or to downmix it into 2-channel PCM.

DTS (default)

Choose this option if you’re connecting a component with a built-in DTS decoder.

DTS > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A converter.

MPEG Out

With this setting you can configure the OPTICAL DIG- ITAL AUDIO OUTPUT to output MPEG audio as it is or to downmix it into 2-channel PCM.

MPEG

Choose this option if you’re connecting a component with a built-in MPEG decoder.

MPEG > PCM (default)

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A converter.

56

Page 56
Image 56
Integra DPC-8.5 instruction manual Audio Menu, Progressive Setting, Digital Out/Digital1 Optical