Configuring the DPC-8.5—Continued
2
Remote controller
Enter
3
Remote controller
Setup
Use the Left and Right [
]/[
] buttons to set the delay time.
Memory | Range | Default |
|
|
|
1 |
| 0 ms |
|
|
|
2 | 50 ms | |
|
|
|
3 |
| 50 ms |
|
|
|
When you’ve finished, press the [Setup] button.
The settings are stored.
Dynamic Range Control
(Dolby Digital Only)
With the Dynamic Range Control you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume
Off (default)
The full dynamic range is preserved.
On
The dynamic range is reduced.
Notes:
•The impact of the Dynamic Range Control depends on the Dolby Digital material that you are playing and with some material there will be little or no effect.
•This setting automatically reverts to Off when the
SACD Audio Setup
SACD
Notes:
•This setting affects only the analog multichannel out- put. To delay audio from the other outputs, use the delay settings (i.e., the speaker distance settings) on the connected AV receiver.
•The AV Synchronization setting has no effect on SACD (multichannel area and
SACDs have two separate areas for storing audio— one for multichannel audio, the other for
2 ch Area
The
Multi ch Area (default)
The multichannel audio is played.
CD Area
The CD layer of hybrid SACDs is played.
Notes:
•If Multi ch Area is selected, and an SACD that con- tains no multichannel area is selected, the
CD Audio Setup
CD
This setting configures the digital audio outputs for use with normal CDs or DTS CDs.
PCM (default)
Choose this option when playing normal audio CDs.
DTS
Choose this option when playing DTS CDs.
Notes:
•This setting can be set only when the DTS Out setting for Digital Out/Digital 1 or 2 is set to
61
