Configuring the DPC-8.5—Continued
3 | When you’ve finished, press the |
| |
| [Setup] button to exit setup, or |
Remote controller press the Left [
] button repeat-
Setup | edly to go back to the main setup |
| |
| menu. |
Note:
•The Speaker Distance settings have no effect on SACD (multichannel area and
Setting Levels With the Test Tone
4 | Use the Up and Down [ ]/[ ] |
Remote controller | buttons to select Test Tone, and |
then press the [Enter] button. | |
| The Test Tone settings appear onscreen. |
Enter |
|
6 | When you’ve finished, press the | |
| ||
Remote controller | [Setup] button to exit setup, or | |
press the Left [ ] button repeat- | ||
Setup | ||
edly to go back to the main setup | ||
| ||
| menu. |
AV Synchronization
When using progressive scanning, you may find that the picture and sound are out of sync. With this setting you can delay the audio to correct this. There are three setup memories (1, 2, 3) for storing settings for up to three components. Memories 2 and 3 are already set at 50 ms, which is a good staring point when compensating for the video delay caused by a typical projector with a
On Standby
5
Remote controller
Enter
Use the Up and Down [
]/[ ] buttons to select a speaker, press the [Enter] button, use the Left and Right [
]/[
] buttons to adjust the level, and then press [Enter] again.
Repeat for each speaker.
A test tone is output by each speaker as it is selected.
Speaker levels can be adjusted in 1 dB steps.
Speaker | Range | Default | |
|
|
| |
Front Left |
|
| |
|
|
| |
Center |
|
| |
|
|
| |
Front Right |
| ||
| 0 dB | ||
Surround | |||
0 dB | |||
| |||
Right |
| ||
|
| ||
|
|
| |
Surround Left |
|
| |
|
|
| |
Subwoofer |
|
| |
|
|
|
You cannot set the level of speakers that are set to Off.
|
|
|
| Open/ |
|
|
|
| Close |
| Search | Last M | Memory Chain Mode | |
|
|
|
| Repeat |
| 1 | 2 | 3 |
|
|
|
|
| |
| 4 | 5 | 6 |
|
|
|
|
| Random |
| 7 | 8 | 9 |
|
|
|
|
| Display |
| +10 | 0 | Clear |
|
| Top Menu |
|
| Menu |
Enter |
| Enter |
| |
/ |
|
| ||
Return |
|
| Setup | |
| Audio | Angle | Subtitle | Setup |
|
| |||
| Stop | Play | Pause | |
| FR | FF | Down | Up |
| Disc 1 | Disc 2 | Disc 3 | Step/Slow |
| Disc 4 | Disc 5 | Disc 6 |
|
| Disc Skip | Progressive Dimmer | ||
| |
Selecting AV Synchronization | |
1 | Use the Up and Down [ ]/[ ] |
Remote controller | buttons to select setup 1, 2, or 3, |
| and then press the [Enter] or |
| Right [ ] button. |
Enter | The parameters appear onscreen. |
60
