Configuring the DPC-8.5—Continued
3
Remote controller
Enter
Use the Up and Down [
]/[ ] but- tons to specify the parental lock level from 1 through 8, and then press [Enter].
The parental lock is now set.
The parental lock levels conform to U.S. movie ratings as follows:
•Level 7:
•Level 6: R
•Level 4: PG13
•Level 3: PG
•Level 1: G
Title/Group Stop
With this setting you can determine whether or not play- back stops when the title or group that’s currently play- ing ends.
Off (default)
Playback continues when the title or group ends.
On
Playback stops when the title or group ends.
PBC
4 | When you’ve finished, press the | |
| ||
Remote controller | [Setup] button. | |
The settings are stored. | ||
Setup | ||
|
Notes:
•When entering the security code, you can use the [Clear] button to delete numbers.
•This setting can be changed only when playback is stopped.
•Once this setting has been turned on and a security code set, if you want to turn off parental lock, or change the parental lock level, you’ll be prompted to enter the security code.
•Not all discs use parental lock. See the disc’s sleeve notes for details.
•Discs with parental lock may cut certain scenes, replace certain scenes with
•If you forget the security code, instead of entering the numbers, press the Stop [
] button four times.
•When using a disc that supports parental control, depending on the
VCD
This setting is used to enable or disable PBC (Playback Control) for VCDs.
Off
PBC disabled.
On (default)
PBC enabled.
Notes:
•PBC functionality depends on the disc. See the disc’s sleeve notes for details.
•Some VCDs may not use all of the PBC functions sup- ported by the
Priority Contents
This setting determines what’s played when a
The
The
Auto power off
The Auto power off function automatically turns off the
Off (default)
Auto power off function off.
On
Auto power off function on.
64
