3.4.1 IDE Channel sub-menu:
When there is a drive installed on an IDE or SATA, the sub menu will look like the following:
PhoenixBIOS Setup Utility
Main
|
| IDE Pri./ATA Master [200GB] | Item Specific Help | ||
Type: |
| [Auto] |
|
|
|
|
| LBA Format |
| User = you enter | |
Total Sectors: | 390721968 |
| parameters of hard | ||
Maximum Capacity: | 200GB |
|
| disk drive installed at | |
|
|
|
|
| this connection. Auto |
[16 Sectors] |
| = autotypes hard disk | |||
LBA Mode Control: | [Enabled] |
| drive install here. 1- | ||
32 Bit I/O: |
| [Disabled] |
| 39 = you select pre- | |
Transfer Mode: | [FPIO 4 / DMA 2] |
| determined type of | ||
Ultra DMA Mode: | [Disabled] |
| |||
|
|
|
|
| installed here. CD- |
|
|
|
|
| ROM = a |
|
|
|
|
| drive is installed here. |
|
|
|
|
| ATAPI Removable = |
|
|
|
|
| removable disk drive |
|
|
|
|
| is installed here. |
F1 Help | ↑↓ Select Item | F9 Setup Defaults |
| ||
ESC Exit | ←→Select Menu | Enter | F10 Save and Exit |
| |
The following table shows the items that you can customize on the IDE/SATA
Item | Options | Description |
Type | Auto | User = you enter parameters of |
| None | hard disk drive installed at this |
| ATAPI Removable | connection. |
| Auto = autotypes hard disk drive | |
| IDE Removable | installed here. |
| Other ATAPI | |
| User | drive installed here. |
|
| |
|
| installed here. |
|
| ATAPI Removable = removable |
|
| disk drive is installed here. |
|
|
|
Disabled | Specify the number of sectors | |
| 2 sectors | per block for multiple sector |
| 4 sectors | transfers. ‘Max’ refers to the |
| 8 sectors | size the disk returns when |
| 16 sectors | queried. |
|
|
|
LBA Mode Control | Disabled | Enabling LBA causes Logical |
| Enabled | Block Addressing to be used in |
|
| place of Cylinders, Heads & |
|
| Sectors. |
|
|
|
32 Bit I/O | Disabled | This setting enables or disables |
| Enabled | 32 bit IDE data transfers. |
|
|
|
49
